Rockford Fosgate Power T400-2 - 2 Channel Amplifier
The T400-2 is "One of the most impressive amps I've ever seen." says Sergey of K&B Audio. Don't let its size fool you ... this all MOSFET amp packs enough power to run one 2-Ohm DVC or two 4-Ohm DVC subwoofers with ease and its dual function EQ can tune-in any pair of high frequency component speakers to deliver premium sound quality. "The amplifier is without a doubt the most efficient Class A/B amplifier I've ever tested."
- 24dB/octave crossover
- MOSFET power supply
- MOSFET output stage
- 4 Gauge power/ground connectors
- Audiophile grade speaker connections
- RCA pass-thru outputs
Specification:
- Number of Channels: 2
- Rated Power (RMS Continuous Power):
- 120 Watts x 2 @ 4-Ohms
- 200 Watts x 2 @ 2-Ohms
- 400 Watts x 1 @ 4-Ohms Bridged
- 2-Ohms x 1 Bridged Stable
- Total Power (Sum of Rated Power) 400 Watts RMS
- Dynamic Power (PVC/PowerCube® Measurement):
- 140 Watts x 2 @ 4-Ohms 0° Res
- 234 Watts x 2 @ 2-Ohms 0° Res
- Bridgeable Yes
- Efficiency (average)
- 76% @ 4-Ohm
- 71% @ 2-Ohm
- Crossover Controls:
- High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
- Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
- Tone Controls:
- Treble: 0dB to +12dB @ 12kHz
- Bass: 0dB to +18dB @ 45Hz
- Signal Input: Low level: 1 RCA pair
- Signal Output: Low level: 1 RCA pair
- Power Input Connector: Block
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Screw terminal barrier strip
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2)
- Visual Indicators: Power, Thermal, Protect
- Circuit Topology Class: Class A/B
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Shipping Weight: 10.29 Lbs. (4.66 Kg.)
- Dimensions (HxWxL): 2.14 x 8.14 x 11.41 (in) / 5.42 x 20.68 x 28.97 (cm)