Rockford Fosgate Power T600-2 - 2 Channel Amplifier

Rockford Fosgate Power T600-2 - 2 Channel Amplifier

The T600-2 small chassis design and power output is a great alternative when power is a must and space is limited. Don't let its size fool you though … this all MOSFET amp packs enough power to run one 2-Ohm DVC or two 4-Ohm DVC subwoofers with ease and its dual function EQ can tune-in any pair of high frequency component speakers for premium sound quality. 
 

• 24dB/octave crossover
• MOSFET power supply
• MOSFET output stage
• 4 Gauge power/ground connectors
• Audiophile grade speaker connections
• RCA pass-thru outputs

Specification:

• Number of Channels: 2
• Rated Power (RMS Continuous Power):
• 200 Watts x 2 @ 4-Ohms
• 300 Watts x 2 @ 2-Ohms
• 600 Watts x 1 @ 4-Ohms Bridged
• 1-Ohm x 2 Stable
• 2-Ohms x 1 Bridged Stable
• Total Power (Sum of Rated Power) 600 Watts RMS
• Dynamic Power (PVC/PowerCube® Measurement):
• 229 Watts x 2 @ 4-Ohms 0° Res
• 369 Watts x 2 @ 2-Ohms 0° Res
• Bridgeable Yes
• Efficiency (average)
• 71% @ 4-Ohm
• 68% @ 2-Ohm
• Crossover Controls:
• High-Pass (HP): 50-500Hz 24dB/octave Butterworth
• Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
• Tone Controls:
• Treble: 0dB to +12dB @ 12kHz
• Bass: 0dB to +18dB @ 45Hz
• Signal Input: Low level: 1 RCA pair
• Signal Output: Low level: 1 RCA pair
• Power Input Connector: Block
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Screw terminal barrier strip
• Speaker Wire Gauge: 8 AWG to 18 AWG
• Heat Sink Type: Cast aluminum
• Cooling: Convection
• Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2)
• Visual Indicators: Power, Thermal, Protect
• Circuit Topology Class: Class A/B
• Frequency Response: 20Hz to 20kHz +/- 1.0dB
• Shipping Weight: 12.15 Lbs. (5.51 Kg.)
• Dimensions (HxWxL): 2.14 x 8.14 x 13.66 (in) / 5.42 x 20.68 x 34.69 (cm)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: