Rockford Fosgate Prime R300X4 - 4 Channel Bridgeable Amplifier Class A/B
Rockford Fosgate amplification at an unbelievable value. The R300X4 4-channel amplifier is so versatile, it will be the only amplifier your system needs. Full-range or component speakers on the front channels and a single R1S410 10" or R1S412 12" woofer bridged/mono on the rear. Consider your system clean, loud and done!..
- 12dB/octave Butterworth crossover
- 0/6/12 dB On Board Punch EQ Control
- 2/4 channel input switch
- High Level Input (4-pin)
- Separate Front and Rear Gain Control
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- 4 Gauge power/ground connectors
- MOSFET power supply
- Over current protection
- Short circuit protection
- Muted turn on
- 1 Year Standard Warranty
- Number of Channels: 4
- Rated Power (RMS Continuous Power):
- 50 Watts x 4 @ 4-Ohm
- 75 Watts x 4 @ 2-Ohm
- 150 Watts x 2 @ 4-Ohm Bridged
- Total Power (Sum of Rated Power): 300 Watts RMS
- Dynamic Power (PVC/PowerCube® Measurement):
- 76 Watts x 4 @ 4-Ohms 0° Res
- 100 Watts x 4 @ 2-Ohms 0° Res
- Bridgeable: Yes
- Frequency Response: 20Hz to 20kHz +/-1dB
- Efficiency (average):
- 69% @ 4-Ohm
- Crossover Controls:
- Front Channels High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth
- Rear Channels High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth
- Tone Controls:
- Front Channels
- Punch Bass: 0dB/+6dB/+12dB @ 45Hz
- Rear Channels
- Punch Bass: 0dB/+6dB/+12dB @ 45Hz
- Function works when crossover in (LP) position
- Signal Input: Low level: 2 RCA pair
- Power Input Connector: Screw terminal
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Screw terminal
- Speaker Wire Gauge: 8 AWG
- Heat Sink Type: Extruded Aluminum
- Cooling: Convection
- Visual Indicators:
- Power LED
- Protect LED
- Circuit Topology Class: Full Range Class-A/B
- Shipping Weight: 7.8 Lbs. (3.53 Kg.)
- Dimensions (HxWxL):
- 1.98 x 6.77 x 13.19 (in)
- 5 x 17.2 x 33.5 (cm)