Rockford Fosgate Punch P1000X1BD - Mono Amplifier 1000 Watts Class BD Amp
With its super efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- RCA pass-thru outputs
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- 1 Year Standard Warranty
- Number of Channels 1
- Rated Power (RMS Continuous Power)
- 300 Watts x 1 @ 4-Ohm
- 500 Watts x 1 @ 2-Ohm
- 1000 Watts x 1 @ 1-Ohm
- Total Power (Sum of Rated Power): 1000 Watts RMS
- Dynamic Power (PVC/PowerCube® Measurement):
- 491 Watts x 1 @ 4-Ohms
- 874 Watts x 1 @ 2-Ohms
- 1,430 Watts x 1 @ 1-Ohm
- Bridgeable: no
- Efficiency (average):
- 86% @ 4-Ohm
- Crossover Controls:
- Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
- Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
- All-Pass: No
- Tone Controls:
- Punch EQ2 Bass: 0dB to +18dB @ 45Hz
- Signal Input: Low level: 1 RCA pair
- Signal Output Low level: 1 RCA pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators:
- Power
- Thermal
- Protect
- Circuit Topology Class: Class B/D
- Frequency Response: 20Hz to 250Hz +/- 1.0dB
- Shipping Weight: 12.9 Lbs. (5.85 Kg.)
- Dimensions (HxWxL)
- 2.38 x 7.76 x 13.28 (in)
- 6.05 x 19.71 x 33.73 (cm)